Elegoo resin vat leaks around the release film

Where this problem appears

Elegoo resin printers with replaceable vat release film.

Symptoms to confirm

• Resin appears beneath the vat or around the film frame.

Likely causes

• The film is punctured, unevenly clamped, contaminated at the seal or fitted with incorrect tension.

Work in order

Step-by-step fix

1. 1

   Stop printing and wear gloves and eye protection

2. 2

   Remove the vat without spreading resin

3. 3

   Protect the LCD from further drips

4. 4

   Empty and filter the resin

5. 5

   Inspect film and frame under bright light

6. 6

   Replace damaged film using the exact frame sequence

7. 7

   Leak-test the empty vat before adding resin

If the main path does not work

• Use a spare verified vat to confirm the printer itself is unaffected.

How to reduce repeat failures

Inspect the film after failed prints and remove cured fragments gently.

Common questions